Zvárací prístroj FUJIKURA 12S

Požiadať o cenovú ponuku

Najmenšia a najľahšia zváračka na svete je zárukou rýchlej a efektívnej výstavby sietí FTTx. S váhou 776 g a rozmermi 121 x 162 x 52 mm je spoľahlivým nástrojom v málo prístupnom prostredí. Pri pevných v drážkach vďaka dvojosovému dohľadovaciemu systému je schopná dosiahnuť za 15 sec. priemerné hodnoty 0,05 dB SM a 0,02 MM.

Prezentácia Fujikura 12S

Popis

Applicable fibersSingle / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
Cladding dia. / Sheath dia.125μm / 160μm to 3mm by fiber holder system
Cleave length5mm to 13mm
Splice mode / heating modeTotal 100 splice modes / 30 heating modes
Splice loss0.05dB (SM), 0.02dB (MM), 0.08dB (DS) and 0.08dB (NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
Splice timeTypical 15sec SM AUTO
Tube heating timeTypical 30sec FP-03,coating dia.900μm
Splice result storageLast 2000 splices
Viewing methods / magnification2 axis CMOS camera with 4.47” color LCD. 100X magnification.
Tension test1.96 to 2.25N
Applicable protection sleeve60mm, 40mm and Fujikura micro sleeves
No. of splice / heating per battery full chargeTypical 100 cycles with BTR-10
Electrode life3000 splices
Size / weight121W x 162D x 57H (mm) / 776g (including battery)
Operating conditionAltitude : 0 to 5,000m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Resistance testsShock : 76cm (30inch) all surface drop
Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate).
Rain : H=10mm/hr for 10min
Other featuresPC software upgrade / data management

 

 

Parametre Fujikura 12S
Parametre Fujikura 12S
Fuji12S_E.pdf
1.0 MiB
261 Downloads
Detaily

Ďalšie informácie

Hmotnosť0.776 kg
Rozmery0.162 × 0.121 × 0.057 cm

You may also like…